Bobcat T-200 Drive Sprocket 6715821

New undercarriage parts and rubber tracks are sold individually but we suggest replacing all of your worn parts at the same time.

This is the aftermarket replacement drive sprocket for the Bobcat^® compact track loaders.

This sprocket is the original sprocket for the following models:

Bobcat T200
Bobcat T250
Bobcat T300
Bobcat 864

Sprocket Specs:

6 Bolt Holes
17 Teeth
Inside Diameter: 6 1/4 inches
Outside Diameter: 18 7/8 inches
Depth: 4 5/8 inches

If you have updated your drive motor then you need part number 7107787. If your machine is newer then you may also have the 7107787, please include your serial number and width of your sprocket at the time of ordering.

Bobcat 6715821 Sprocket Depth Not sure how to measure your T300 Sprockets to determine which one you need? Feel free to call for all of your Bobcat^® maintenance parts questions and we will guide you to the right part and take your order over the phone. If you have the sprocket off of the machine and laying on a flat surface you can typically determine the sprocket you need by measuring from the flat surface to the edge of the sprocket.

Bobcat 7107787 Sprocket Depth Compared to the newer version of the Bobcat sprocket known as 7107787 there is a clear difference. This is the newer version sprocket for the later models and latest drive motor. If your sprocket compares to this 6 inch deep version you need this sprocket: Bobcat 7107787 Sprocket