GEHL CTL 70 Sprocket- Rare

Our Products: Mustang Track Loader
SKU: 182792
Weight: 56 lbs
Replacement aftermarket drive sprocket for the GEHL CTL 70 compact track loader. (double check your serial number)
Price: $332.00
Please visit Rubbertrax.com for online checkout.
Gehl CTL 70 Sprocket
GEHL CTL 70 Sprocket- Rare
Previous Item Previous Item   Next Item Next Item

New undercarriage parts and rubber tracks are sold individually but we suggest replacing all of your worn parts at the same time.

This is the replacement aftermarket drive sprocket option for the GEHL CTL 70 compact track loader. This sprocket only fits the GEHL CTL 70 if your serial number is less than 1390. This sprocket is also known to fit the Takeuchi TL140 if your serial number is lower than 21402001. This sprocket is interchangeable with some Takeuchi and Mustang track loaders.


The difference between the two sprocket options is in the diameter of the mounting hole. If you are unsure of your serial number please submit the diameter of your mounting hole before ordering. It should measure 7 7/8 inches for this sprocket.



Sprocket Specifications:
  • 9 Mounting Bolt Holes
  • 14 Drive Teeth
  • Inside Diameter: 7 7/8 Inches
  • Outside Diameter: 18 1/2 Inches
  • Width at Base of Tooth: 7/8 Inches

Alternate Part Number: Takeuchi dealer part number: 08821-60010, 882160010
Gehl dealer part number: 182792
Alternate Model:
This sprocket is known to fit the Takeuchi TL140 if your serial number is lower than 21402001, and the Gehl CTL 70 if your serial number is below serial number 1390.
Alternate Part:
The 08811-60110 part is an option for your TL140 above 21402001 and Gehl CTL70 serial numbers above 1390.

Gehl CTL70 sprocket locationThe Gehl CTL70 drive sprocket is located at the top of the undercarriage to the rear of the machine—the sprocket bolts to the drive motor with nine bolts (hardware not included). 


Product Reviews
Write your own review
Rate this product:  1   2   3   4   5   6   7   8   9   10